Cabletron Systems VHSIM-G02 Manual De Usuario

Descargar
Página de 34
Chapter 3: LANVIEW LEDs
3-2
VHSIM-G02 User’s Guide
3.2
REDUNDANCY
The VHSIM-G02 supports two modes of operation. In the active mode, 
both interfaces are enabled, and all LED descriptions will apply to both 
ports. In the redundancy mode, one port is active while the other is 
redundant.
In the redundancy mode, only one of the two ports on the VHSIM-G02 is 
active at one time. The port with link status showing (either a green LED, 
solid or blinking, or an amber LED) is the active port. If both ports show a 
link, Port 1 is the active port. The default port for the primary port link is 
Port 1. 
The interfaces can be set in the active mode only if the host platform has 
16 or less fixed front panel ports. If the host platform has more than 16 
fixed front panel ports, the ports on the VHSIM-G02 will be in 
redundancy mode. The host platform will allow the redundancy mode to 
be set regardless of the number of fixed front panel ports.
Table 3-1
VHSIM-G02 LED Functionality
LED
Color
Definition
Transmit
Green (Flashing)
Activity, port enabled.
Amber (Blinking)
Port in standby.
Off
No activity, port enabled or disabled.
Red (Flashing)
Transmit fault or error.
Red Diagnostic 
failure.
Receive
Green (Solid)
Link, no activity. Port enabled.
Green (Blinking)
Link, port disabled.
Amber (Flashing)
Link, activity. Port enabled.
Off
No link, no activity. Port enabled or 
disabled.
Red
Diagnostic failure.