8e6 Technologies ERS-100 (5K02-51) Manual De Usuario

8

e

6 e

nterprise

r

eporter

Q

uick

s

tart

G

uide

Create a “setup workstation” using a Windows-based laptop or desktop machine with a 

network card and Internet Explorer 6.0 (or later). The setup workstation will be used for 

accessing the ER server on the network and configuring the unit. 

A.  From the desktop of the setup workstation, follow the procedures for your machine 

type:

Windows XP - go to Start > Control Panel. Open Network Connections. Right-

click the link for LAN or High-Speed Internet and choose Properties. 

Windows 2000 - right-click the My Network Places icon and select Properties. 

Right-click the correct Local Area Connection and choose Properties.

Windows NT - right-click the Network Neighborhood icon and select Properties.

Windows ME - right-click the My Network Places icon and select Properties.

B.  Click on 

Internet Protocol (TCP/IP) to highlight it (Windows NT and ME users 

should select the Protocols or Configuration tab and choose 

TCP/IP Protocol).

C.  Click the 

Properties button.

D.  Choose the option 

Use the following IP address (Windows NT and ME users 

should choose the option 

Specify an IP Address).

E.  Type in the

 IP address of 1.2.3.3.

F.  Type in the 

Subnet mask (netmask) of 255.0.0.0 and click OK.

G.  Close the LAN connection properties box.

If you have a NAS (SCSI Connected Storage Device or “SAN”) that will be used with the 

ER, you will need to connect it to the ER at this point. Refer to the Appendix at the end of 

this document for instructions on how to connect the SCSI Connected Storage Device.