Cisco Systems 3515 MCU24 Manual De Usuario

The network interface card settings screen appears as follows:

Choose : 1 - 10Mbps  Half Duplex

       : 2 - 100Mbps Half Duplex

       : 3 - 10Mbps  Full Duplex

       : 4 - 100Mbps Full Duplex

       : 5 - Auto

     other - Quit

       :

Enter a number between 0 and 5, inclusive, representing the required option.

We recommend using 5 (Auto) and the ethernet switch port to autonegotiate speed/duplex.

Press any other key to quit without changing the network working mode.

At the prompt, enter 4 to disable the DSP reset facility.

After options Q and 1-3, press any key to return to the video processing module Main menu. After option 
4, the video processing module Main menu displays automatically.

Only qualified technical personnel should modify the DSP reset function settings.

Modified network configuration settings are automatically saved when you exit the video processing 
module Main menu.

Ensure you have completed your configuration.

At the prompt, enter Q to exit the video processing module Main menu.

The video processing module Main menu closes and your machine will automatically reboot.

Connect the supplied LAN cable from your network switch to the 10/100BaseT Ethernet port on the front 
panel of the EMP unit. The 10/100BaseT port accepts an RJ-45 connector.

We recommend setting the network switch port to auto-negotiate speed/duplex.

Turn on the power to the EMP unit.