Cabletron Systems EMM-E6 Ethernet Manual De Usuario

•

Slide the EMM-E6 into the first and second slots of the MMAC chassis (as 
shown below).

•

Secure the module by tightening the knurled knobs at the top and bottom of 
the module.

•

Power on the MMAC chassis. Monitor the state of the CPU LED.

•

The CPU LED will flash, indicating the EMM-E6 is in boot state. During this 
period, which may last up to 5 minutes, the STBY LEDs will blink to indicate 
the module’s boot state.

•

Fully operational EMM-E6 should display the following LED states:

-

CPU LED flashing, indicating normal operation.

-

STBY LEDs lit or unlit, depending on the results of 
spanning tree operation.

-

Appropriate BRIM/EPIM LEDs lit.

-

ON LED lit for the active Channel D EPIM.

Columns:

Controls:

Autowrap:

Scroll:

Text Cursor:

Cursor Style:

Mode:

ID Number:

Cursor Keys:

Transmit:

Receive:

XOFF:

Bits:

Parity:

Stop Bit:

Local Echo:

Port:

Auto

Answerback:

Keys:

Margin Bell:

Warning

Bell:

INSTALLATION

TERMINAL SETUP

CH1Book  Page 6  Wednesday, March 20, 1996  7:48 AM