Acer 4000 Manual De Usuario

53

Chapter 2

Set Supervisor Password 

Defines whether a password is required or not while the events defined 
in this group happened. The following sub-options are all requires the 
Supervisor password for changes and should be grayed out if the user 
password was used to enter setup. 
When you set Supervisor password already and then you reboot and 
into BIOS setup manual by User password, the set Supervisor 
password, Boot device and Lock Hard Drive will be disable. 
Allows the user to specify whether or not a password is required to boot. 

Set User Password 

Set HDD Password

When shown as [Locked], the hard drive passowrd currently can not be changed 
or disabled. 
To change or disable it, turn off the system and enter Setup immediately after 
turning it back on.
Press [Enter] to input, change or disable hard drive password.

Password on boot

Defines whether a password is required or not 
while the events defined in this group 
happened. The following sub-options are all 
requires the Supervisor password for changes 
and should be grayed out if the user password 
was used to enter setup.