Wacom PTK-450 Manual De Usuario
78
78
WIRELESS SETUP
Configure Intuos5 for wireless operation.
1. If you have been using Intuos5 as a wired tablet, disconnect the USB cable.
2. Turn the tablet over. Remove the wireless compartment cover(s). See (A).
Slide cover(s) away from tablet body to remove. Medium- and large-sized
tablets are equipped with two covers: one for the Wacom wireless module,
and one for the rechargeable battery. Small-sized tablets come with a
single cover.
tablets are equipped with two covers: one for the Wacom wireless module,
and one for the rechargeable battery. Small-sized tablets come with a
single cover.
3. Install the wireless components.
4. If you have not already done so, turn on your computer and wait until the system has fully loaded.
Next, connect wirelessly.
A
•
Install the battery. Align contacts (B) as
shown and press into place. See also
shown and press into place. See also
•
Install the wireless module. Lift away and
remove the wireless module spacer (C).
Slide the wireless module into the tablet,
ensuring the connector is fully seated (D).
remove the wireless module spacer (C).
Slide the wireless module into the tablet,
ensuring the connector is fully seated (D).
Important: Save the module spacer.
You may need it as a tool for removal of
the wireless module. See
You may need it as a tool for removal of
the wireless module. See
•
Replace the wireless compartment cover(s).
Align and slide into place (E).
Align and slide into place (E).
•
Connect the Wacom wireless receiver to an
active USB port on your computer or USB
hub (F).
active USB port on your computer or USB
hub (F).
B
C
D
E
F