Panasonic CM0610MJ0-CD Manual De Usuario
2. Preparation
22
For assistance, please visit http://www.panasonic.com/help
2.9 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
1
{
Menu} i {#}{1}{0}{3} i {Set}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {Flash}.
L
To erase a number, press {Stop}.
3
{
Set}
4
Press {Menu} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
number, and make the correction.
L
To erase all numbers, press and hold {Stop}.
2.10 Configuring the unit to
access the LAN (KX-FLM671
only)
access the LAN (KX-FLM671
only)
You can print documents, scan documents, receive
faxes or send faxes using a computer connected to the
LAN. To enable these features, you need to set the IP
address, subnet mask, and default gateway in the unit.
faxes or send faxes using a computer connected to the
LAN. To enable these features, you need to set the IP
address, subnet mask, and default gateway in the unit.
Important:
L
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
the IP address, subnet mask, and default
gateway.
2.10.1 Setting up automatically with a
DHCP server
DHCP server
Your situation:
–
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, connect the power cord.
computer, connect the power cord.
L
The IP address, subnet mask, and default
gateway will be set automatically.
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with. See page 23 for details.
you want to use it with. See page 23 for details.
Note:
L
You can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.
2.10.2 Setting up manually
Your situation:
–
–
When your network administrator does not manage
the network with a DHCP server.
the network with a DHCP server.
–
When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
default gateway manually.
1
{
Menu}
2
Press {#}{5}{0}{0} to display “
DHCP”.
3
Press {0} to select “
DISABLED”. i {Set}
4
Set each item.
For the IP address:
1. Press {5}{0}{1} to display “
IP ADDRESS”.
2. {Set} i Enter the IP address of the unit. i
{
Set}
For the subnet mask:
1. Press {5}{0}{2} to display “
SUBNET MASK”.
{<}{>}
{
Set}
{
Menu}
{
Stop}
{
Flash}