ZyXEL Communications n/a Manual De Usuario

Chapter 1 How to Access and Use the CLI

DSL & IAD CLI Reference Guide

Use the administrator password to log into the ZyXEL Device. The default value is ‘admin’ or 
‘1234’ - see your ZyXEL Device User’s Guide to see which one to use. Some ZyXEL Devices 
may require you to also enter a user name. The default user name is ‘admin’.

The ZyXEL Device automatically logs you out of the management interface after five minutes 
of inactivity. If this happens to you, simply log back in again. Use the sys stdio command 
to extend the idle timeout. For example, the ZyXEL Device automatically logs you out of the 
management interface after 60 minutes of inactivity after you use the sys stdio 60 
command.

This table identifies some shortcuts in the CLI, as well as how to get help.

Use the help command to view the available commands on the ZyXEL Device. Follow these 
steps to create a list of supported commands:

1 Log into the CLI. 
2 Type help and press [ENTER]. A list comes up which shows all the commands 

available for this device.

Table 5   CLI Shortcuts and Help

yz

 (up/down arrow keys)

Scrolls through the list of recently-used commands. You can edit 
any command or press [ENTER] to run it again.

[CTRL]+U

Clears the current command.

?

Displays the keywords and/or input values that are allowed in 
place of the ?.

help

Displays the (full) commands that are allowed in place of help.

ras> help

Valid commands are:

sys             exit            ether           wan

wlan            ip              ipsec           bridge

certificates    bm              lan             radius

8021x           voice           

ras>