ZyXEL Communications n/a Manual De Usuario

Chapter 22 Wireless LAN Commands

DSL & IAD CLI Reference Guide

This section shows how to use the wireless LAN commands in some example scenarios.

The example varies depending on the commands you can use on your ZyXEL Device.

The following example:

• Activates the WLAN.

• Sets the wireless channel to 6.

• Sets the SSID to “ZyWiFi”.

• Sets the MAC address filter to deny association to devices on its list.

• Adds the MAC address “fa:fa:fa:fa:fa:fa” to the MAC address filter list slot 1. 

• Activates the MAC filter.

• Sets the WEP type to 128-bit.

• Configures the WEP key 1 to be “1234567890123”.

• Sets the ZyXEL Device to use WEP key 1.

• Turns on QoS.

• Sets the QoS to AP mode.

• Configures the Voice QoS settings with an aifs of 9µs, a cwmin of 7 and a cwmax of 

15, a txop-b of 250 and a txop-g of 250.

• Saves the configuration.

• Displays the configuration.

wlan wps release <Yes:1|No:0>

Enables or disables removing of all configured 
wireless and wireless security settings for WPS 
connections.

wlan wmm active <Yes:1|No:0>

Enables or disables the WMM feature on the ZyXEL 
Device.

Table 69   General Wireless Commands (continued)