Manualsbrain.com
  1. Manuales
  2. Marcas
  3. ZyXEL Communications
  4. n/a
  5. Manual De Usuario

ZyXEL Communications n/a Manual De Usuario

Descargar
Página de 222
Chapter 2 Common Commands
DSL & IAD CLI Reference Guide
28
You may also configure and schedule new policies using commands as well as configure what 
to block using the external database. 
2.5  Firewall
Use the following command to enable the firewall on the ZyXEL Device. 
2.6  VPN
Use the following command to show what IPsec VPN tunnels are active on your ZyXEL 
Device.
Use the following command to manually bring up a previously configured VPN tunnel. 
2.7  Dialing PPPoE and PPTP Connections
This example shows dialing up remote node “WAN 1” using PPPoE..
ras> sys firewall active yes
ras>
ras> ipsec show_runtime sa
Runtime SA status:
No phase 1 IKE SA exist
No phase 2 IPSec SA exist
Active SA pair = 0
ras>
ras> ipsec dial 1
Start dialing for tunnel <rule# 1>...
.....................
ras> poe dial "WAN 1"
Start dialing for node <WAN 1>...
### Hit any key to continue.###
$$$ DIALING dev=6 ch=0..........
$$$ OUTGOING-CALL phone()
$$$ CALL CONNECT speed<100000000> type<6> chan<0>
$$$ LCP opened
$$$ PAP sending user/pswd
$$$ IPCP negotiation started
$$$ IPCP neg' Primary DNS 192.168.30.1
$$$ IPCP neg' Primary DNS 172.16.5.2
$$$ IPCP opened