Barco 26-0405000-00 Manual De Usuario
102
PresentationPRO-II • User’s Guide
6. Operations
Working with Layers
tçêâáåÖ=ïáíÜ=i~óÉêë
The following topics are discussed in this section:
•
•
•
•
•
•
tçêâáåÖ=ïáíÜ=mfmë
With PresentationPRO-II, you can perform the following types of PIP transitions:
•
•
•
•
qê~åëáíáçåáåÖ=~=mfm=íç=mêçÖê~ã
Use the following steps to transition a PIP to Program:
1. Ensure that you have preset the desired transition type and rate. Refer to the
"
" section on page 115 for details.
2. In the Layer Functions Section, ensure that the PIP button is blinking. If not,
press
PIP to display the PIP Adjustment Menu. Please note:
~
If there is no source on Program, the last source associated with the PIP
will blink on the
will blink on the
Source Selection Bus.
~
If there is a source currently on Program, it will be lit solid on the
Source
Selection Bus.
3. On the Source Selection Bus, select a new source. The button blinks to indicate
that the source is "pending."
~
If there is no source on Program, only the pending source will blink.
~
If there is a source currently on Program, the pending source will blink
and the current source will be lit solid.
and the current source will be lit solid.
4. In the Layer Functions Section, press TRANS. The current PIP transitions off,
the new PIP transitions on, and the
TRANS button lights during the interval.
PIP
Tip
From this point forward, transitioning a PIP is a simple two-
button sequence: (1) select source, (2) press
button sequence: (1) select source, (2) press
TRANS.