Canon 700 Series Manual De Usuario

Supply a suitable table, cabinet, or desk for the machine. See Chapter 8, 

"

Appendix,

"

 in the Reference Guide for specific dimensions and weight.

1. Only a single telephone line (touch-tone or rotary) should be used.

2. Order an RJ11-C modular wall jack (USOC code), which should be installed by 

the telephone company. If the RJ11-C wall jack is not present, telephone/fax 
operation is not possible.

3. Order a normal business line from your telephone company's business 

representative. The line should be a regular voice grade line or an equivalent 
one. Use one line per unit. 

DDD (Direct Distance Dial) line

-or-

IDDD (International Direct Distance Dial) line if you communicate overseas

NOTE

Canon recommends an individual line following industry standards, such as the 2500 
(touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX 
(Public Branch Exchange) unit without "Call Waiting" can be used with the machine. Key 
telephone systems are not recommended because they send nonstandard signals to 
individual telephones for ringing and special codes, which may cause a fax error.

This machine should be connected to a standard 120 volt AC, three-wire grounded 
outlet only.

Do not connect this machine to an outlet or power line shared with other appliances 
that cause "electrical noise". Air conditioners, electric typewriters, copiers, and 
machines of this sort generate electrical noise which often interferes with 
communications equipment and the sending or receiving of documents.