Motorola SBV6120E Manual De Usuario
B
3 Installing the Digital Voice Modem
20
Verifying the IP Address in Windows Vista
Do the following to verify the IP address:
1. On the Windows Desktop, click Start.
2. Click All Programs.
3. Click Accessories.
4. Click Command Prompt to open a command prompt window.
5. Type ipconfig and press Enter to display the IP address.
If an Auto-configuration IP Address is displayed, this indicates an improper connection between
your computer and the SBV6120, or there are broadband network problems.
your computer and the SBV6120, or there are broadband network problems.
Renewing Your IP Address
To renew your IP address in Windows XP or Windows Vista, do the following:
1. Open a command prompt window.
2. At the command prompt, type ipconfig /renew and press ENTER to obtain a new IP
address.
3. Type exit and press ENTER to close the command prompt window.
If after performing this procedure your computer cannot access the Internet, call your cable
provider for help.
provider for help.
Wall Mounting the SBV6120
Do the following to mount the SBV6120 on the wall:
•
Locate the unit as specified by the local or national codes governing residential or business
cable TV and communications services.
cable TV and communications services.
•
Follow all local standards for installing a network interface unit/network interface device
(NIU/NID).
(NIU/NID).
If possible, mount the unit to concrete, masonry, a wooden stud, or some other very solid wall
material. Use anchors if necessary (for example, if you must mount the unit on drywall).
material. Use anchors if necessary (for example, if you must mount the unit on drywall).
CAUTION: Before drilling holes, check the structure for potential damage to water, gas, or electrical lines.
Make sure the AC power plug is disconnected from the wall outlet and all cables are removed
from the back of the SBV6120 before starting the installation.
from the back of the SBV6120 before starting the installation.