3M C3266PW Manual De Usuario
14
3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-39373 REV E
2.
Make sure the video image is displayed. If it is not, check the LED to ensure that the
display is not in power save mode (amber)
display is not in power save mode (amber)
3.
Make sure the video image is centered within the screen area. Use the display
controls to adjust the image, if necessary.
controls to adjust the image, if necessary.
You can adjust the horizontal and vertical position, contrast, and brightness to better suit
your video card and your personal preference. For additional details, refer to the
Adjusting the Video Display later in this chapter.
your video card and your personal preference. For additional details, refer to the
Adjusting the Video Display later in this chapter.
Mounting the Multi-Touch Chassis Display
The Multi-Touch Chassis Display is designed to fit any type of enclosure. All 3M Touch
Systems chassis displays are encased in rugged metal instead of plastic, making them
easy to integrate.
Systems chassis displays are encased in rugged metal instead of plastic, making them
easy to integrate.
CAUTION
To avoid the risk of glass breakage which may result in minor or moderate injury:
To avoid risk of injury when handling the display be aware that the sensor edges may
be sharp.
To avoid risk of injury when handling the display be aware that the sensor edges may
be sharp.
The Multi-Touch Chassis Display includes a hardware accessory kit for mounting the
unit into an enclosure. The hardware accessory kit includes 4 mounting brackets and (12)
8-32 screws. The mounting holes are located on all 4 sides of the display. Always use the
supplied screws.
unit into an enclosure. The hardware accessory kit includes 4 mounting brackets and (12)
8-32 screws. The mounting holes are located on all 4 sides of the display. Always use the
supplied screws.
Note:
Always use the mounting holes when attaching to the brackets. Do not drill
additional holes in the unit to mount brackets to other locations.
To remove the bezel, simply remove the screws along the edge.
Once you remove the bezel, you can attach the brackets to the edges of the chassis. The
brackets are slotted, allowing the chassis to slide in and out. You can also rotate the
brackets to various positions.
brackets are slotted, allowing the chassis to slide in and out. You can also rotate the
brackets to various positions.
Note:
Given the variety of factors that can affect the use and performance of any
product, some of which are uniquely within the user’s knowledge and control, it is
essential that the user evaluate the specific gasket to determine whether it is suitable for a
particular purpose and suitable for the user’s intended application.
essential that the user evaluate the specific gasket to determine whether it is suitable for a
particular purpose and suitable for the user’s intended application.
Articulating Arm Mounting Option
The unit has a 200 mm VESA mounting pattern on the back to allow for arm mount
capability. Use 3/8 inch (9mm) screws to secure the VESA mount stand for use only with
UL listed wall mount bracket with minimum weight load capability of 33 lbs (15 kg).
Follow the manufacturer's instructions included with the mounting device to properly
attach your display.
capability. Use 3/8 inch (9mm) screws to secure the VESA mount stand for use only with
UL listed wall mount bracket with minimum weight load capability of 33 lbs (15 kg).
Follow the manufacturer's instructions included with the mounting device to properly
attach your display.