3M C3266PW Manual De Usuario
6
3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-39373 REV E
Important Safety Information
Read and understand all safety information before using this product. Follow all
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
Intended Use
The 3M Touch Systems Multi-Touch Chassis Display was designed for touch input and
tested to replace an existing display. These displays are intended for indoor use only
and are not designed for use in hazardous locations.
tested to replace an existing display. These displays are intended for indoor use only
and are not designed for use in hazardous locations.
Explanation of Signal Word Consequences
DANGER:
Indicates a potentially hazardous situation, which, if not avoided, will
result in death or serious injury and/or property damage.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury and/or property damage.
NOTICE:
Indicates a potentially hazardous situation, which, if not avoided, may result
in property damage.
DANGER
To avoid the risk of fire and/or explosion which will result in serious injury or
death:
death:
•
Do not install or use this product in a hazardous location.
WARNING
To avoid the risk of electric shock which could result in serious injury or death:
•
Do not remove the cover or back of the display. The power supply AC line should
be avoided.
be avoided.
•
Plug power cord into appropriate grounded power source.
•
Do not use a power cord that is frayed or otherwise damaged.
•
Do not service the display yourself. There are no user serviceable parts inside.
Refer all servicing to qualified service personnel. Any change or modification to
the equipment not expressly approved by the party responsible for compliance
could void your authority to operate such equipment.
Refer all servicing to qualified service personnel. Any change or modification to
the equipment not expressly approved by the party responsible for compliance
could void your authority to operate such equipment.
•
Do not use a damaged display.
•
Do not use non-conforming replacement parts.
•
Do not place wet or damp objects on the display.