Sony XR-C850RW Manual De Usuario
23
EN
1
Press (SOUND) momentarily until “LP1”
appears.
appears.
2
Rotate the dial to select the desired
listening position.
The listening positions appear in the order
shown above.
listening position.
The listening positions appear in the order
shown above.
After three seconds, the display goes back
to the normal playback mode.
to the normal playback mode.
Adjusting the listening position
1
Press (SOUND) for two seconds.
2
Rotate the dial to select the desired
listening position.
listening position.
3
Press (4) (n).
4
Rotate the dial to adjust the centre of
the sound field to the left or right. Then
set the centre of the sound field.
the sound field to the left or right. Then
set the centre of the sound field.
5
Press (4) (n).
6
Rotate the dial to adjust the centre of
the sound field to the front or rear.
the sound field to the front or rear.
7
Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode display appears.
When the effect setting is complete, the
normal playback mode display appears.
Centre moves to the L (left)
Centre moves to the R (right)
L P 1
ALL
SUR EQ
L P 1
L R
SUR EQ
Centre moves to the R (rear)
Centre moves to the F (front)
L P 1
R F
SUR EQ
Adjusting the fader (FAD)
Normally, with the DSP mode on, the volume
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
1
Follow steps 1 to 3 of “Selecting a
surround menu” (page 21).
surround menu” (page 21).
2
Press (SOUND) momentarily until “FAD”
appears.
appears.
3
Rotate the dial to adjust the fader.
After three seconds, the display goes back
to the normal playback mode.
to the normal playback mode.
Adjusting the volume of
the subwoofer(s)
the subwoofer(s)
1
Press (SOURCE) to select a source (radio,
tape, CD, or MD).
tape, CD, or MD).
2
Press (SOUND) repeatedly until “SUB”
appears.
appears.
3
Rotate the dial to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.
After three seconds, the display goes back
to the normal playback mode.
Decreases the front speaker
volume
volume
Increases front speaker volume
DSP