Raritan Engineering MCCAT116 Manual De Usuario
Compatibility with MasterConsole II
50
3. The rightmost LED on the front panel is lit, indicating the device is
now programmed as a second‐tier device.
4. Repeat Steps 1 to 3 if more MasterConsole II units are to be
programmed as the second‐tier devices.
STEP 2: Connect the Second-Tier MasterConsole II Units
1. Attach a PS/2 CIM to a MasterConsole II unit that is programmed as a
second‐tier device.
2. Connect one end of the Cat5 UTP cable to the RJ45 port of the CIM
being attached to the second‐tier MasterConsole II unit; connect the
other end of the cable to one of the channel ports of the first‐tier
MCCAT unit.
other end of the cable to one of the channel ports of the first‐tier
MCCAT unit.
3. Connect one end of the power cord to the power jack of the
MasterConsole II unit and the other end to the appropriate power
outlet.
outlet.
4. If you want to connect more second‐tier MasterConsole II units to the
first‐tier MCCAT unit, repeat Steps 1 to 3.
5. Power ON the second‐tier devices first. Then power ON the first‐tier
MCCAT unit.
STEP 3: Specify the Type of the Connected Second-Tier
Device in the OSD
Device in the OSD
You must specify the type of the connected device in the Configuration
Menu. Otherwise, you may not be able to access the second‐tier channels.
For instructions on specifying the type, see STEP 4: Specify the Type of
the Connected Second‐Tier Device in the OSD (on page 36).
Menu. Otherwise, you may not be able to access the second‐tier channels.
For instructions on specifying the type, see STEP 4: Specify the Type of
the Connected Second‐Tier Device in the OSD (on page 36).
Note: The second‐tier MasterConsole II unit is shown “/MCC<XXXX>” in the
OSD, where <XXXX> represents the channel number.
OSD, where <XXXX> represents the channel number.