Black Box ACXIO8-SM Manual De Usuario
Page 10
724-746-5500 | blackbox.com
Chapter 1: Specifications
1. Specifications
1.1 Interfaces
1.1.1 DVI-D Single Link
The video interface supports the DVI-D protocol. All signals that comply with
DVI-D single-link standard can be transmitted. This includes, for example, monitor
resolutions such as 1920 x 1200 @ 60 Hz, Full HD (1080p), or 2K HD (up to 2048
x 1152). Data rate is limited to 165 MPixel/s.
DVI-D single-link standard can be transmitted. This includes, for example, monitor
resolutions such as 1920 x 1200 @ 60 Hz, Full HD (1080p), or 2K HD (up to 2048
x 1152). Data rate is limited to 165 MPixel/s.
1.1.2 USB HID
Devices with USB HID interface support a maximum of two devices with
USB HID protocol. Each USB HID port provides a maximum current of 100 mA.
USB HID protocol. Each USB HID port provides a maximum current of 100 mA.
Keyboard
Compatible with most USB keyboards. Certain keyboards with additional
functions may require custom firmware to operate. Keyboards with an integral
USB Hub (Mac
functions may require custom firmware to operate. Keyboards with an integral
USB Hub (Mac
®
keyboards, for example) are also supported.
Mouse
Compatible with most 2-button, 3-button, and scroll mice.
Other USB HID devices
The proprietary USB emulation also supports certain other USB HID devices, such
as specific touchscreens, graphics tablets, bar-code scanners, or special keyboards.
Support cannot be guaranteed, however, for every USB HID device.
as specific touchscreens, graphics tablets, bar-code scanners, or special keyboards.
Support cannot be guaranteed, however, for every USB HID device.
NOTE: Only two USB HID devices are supported concurrently, such as keyboard
and mouse or keyboard and touchscreen. A hub is allowed, but it does not
increase the number of HID devices allowed.
increase the number of HID devices allowed.
To support other USB “non-HID” devices, such as scanners, Web cams or memory
devices, choose our devices with transparent USB support.
devices, choose our devices with transparent USB support.
1.1.3 RJ-45 (Network)
CATx device communication requires a 1000BASE-T connection. Pin the cable
according to EIA/TIA-568-B (1000BASE-T) standard with RJ-45 connectors at both
ends. All four wire pairs are used in both directions. The cabling is suitable for
full-duplex operation. For the cable connection to a source (computer, CPU), use a
cross-pinned network cable.
according to EIA/TIA-568-B (1000BASE-T) standard with RJ-45 connectors at both
ends. All four wire pairs are used in both directions. The cabling is suitable for
full-duplex operation. For the cable connection to a source (computer, CPU), use a
cross-pinned network cable.