Toshiba WT8-A Series Manual De Usuario
1.
Plug the USB connector of the Micro-USB cable into the AC adaptor.
Figure 2-1 Connecting the AC adaptor 1
2-pin
3-pin
Either a 2-pin or 3-pin adaptor/cord will be included with the tablet
depending on the model.
depending on the model.
2.
Plug the other smaller connector of the Micro-USB cable into the
Micro-USB port on your tablet.
Micro-USB port on your tablet.
Figure 2-2 Connecting the AC adaptor 2
3-pin
2-pin
The Micro-USB connector of the Micro-USB cable must be correctly
plugged into the Micro-USB port on the tablet. Failure to do so correctly
may result in possible damage to the Micro-USB port.
plugged into the Micro-USB port on the tablet. Failure to do so correctly
may result in possible damage to the Micro-USB port.
3.
Plug the AC adaptor into a live wall outlet.
Turning on the power
This section describes how to turn on the power.
Never keep your body too close to the tablet while turning on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
The tablet can not be powered on by pressing the power button if the
battery power is completely exhausted. It is recommended to charge
the battery pack by connecting the AC adaptor for 30 minutes before
turning on the power.
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
The tablet can not be powered on by pressing the power button if the
battery power is completely exhausted. It is recommended to charge
the battery pack by connecting the AC adaptor for 30 minutes before
turning on the power.
Press the power button to turn on the tablet.
User's Manual
2-4