OKI 5050 Manual De Usuario

 This function controls how

OKIFAX normally transmits fax messages: by scanning
the document into memory first, or by transmitting di-
rectly from the document feeder. Available settings are
FEEDER (default) and MEMORY.

 If you are using the MEMORY setting and you send

a large number of faxes in one session, you may
encounter a  MEM OVERFLOW error message. If this
occurs often, you can correct the problem either by
adding an optional memory upgrade or by changing to
the FEEDER setting.

 The error correction mode function

may help your OKIFAX improve communication in areas
where telephone line conditions are marginal. See the
Troubleshooting section of this Handbook for other sug-
gestions if you have communication problems. Available
settings are ON (default) and OFF.

 The remote diagnostics feature al-

lows a service person remotely to dial and service your
OKIFAX. Available settings are ON and OFF (de-
fault).

 This function allows you to acti-

vate the Echo Protection feature for a specific One
Touch key, without changing the normal settings.
Echo Protection can improve communication with a

location in a noisy telephone area. For instructions
on changing One Touch Parameters settings for a
One Touch key, see page 28.

Press the Select Function key.

Press the 9/User Program One Touch key.
The display shows 1:FUNC. PROGRAMMING.

Press the Yes 

§ key. The display shows FUNCTION

NO. [  ].

Using the numeric keypad, enter the 2-digit number of
the function you want to change. The display shows the
name of the selected function.

Repeatedly press the No 

©

 key until the setting you want

appears in the display.

 If you are changing the TX MODE DEFAULT set-

tings, the new settings appear on the lights above the
Yes

 § and the No © keys

Press the Yes 

§ key to confirm your selection. The

name of the next function setting appears in the
display.

Press the Select Function key to finish.

Of5050hw.pm6

4/15/98, 9:32 AM

53