Moxa Technologies W341 Manual De Usuario

 

 

Compiling tcps2.c 

The source code for the tcps2 example is located on the CD-ROM at 
CD-ROM://example/TCPServer2/tcps2.c. Use the following commands to copy the file to a 
specific directory on your PC. We use the direrctory /home/w341/1st_application/. Note that you 
need to copy 3 files—Makefile, tcps2.c, tcpsp.c—from the CD-ROM to the target directory.   

 

Type #make to compile the example code: 

You will get the following response, indicating that the example program was compiled 
successfully. 

   root@server11:/home/w341/1st_application 

[root@server11 1st_application]# pwd 
/home/w341/1st_application 
[root@server11 1st_application]# 11 
total 20 
-rw-r—r--  1 root root  514 Nov 27 11:52 Makefile 
-rw-r—r--  1 root root 4554 Nov 27 11:52 tcps2.c 
-rw-r—r--  1 root root 6164 Nov 27 11:55 tcps2.c 
[root@server11 1st_application]# make_ 
/usr/local/arm-linux/bin/arm-linux-gcc -o tcps2-release tcps2.c 
/usr/local/arm-linux/bin/arm-linux-strip –s tcps2-release 
/usr/local/arm-linux/bin/arm-linux-gcc -o tcpsp-release tcpsp.c 
/usr/local/arm-linux/bin/arm-linux-strip –s tcpsp-release 
/usr/local/arm-linux/bin/arm-linux-gcc –ggdb -o tcps2-debug tcps2.c 
/usr/local/arm-linux/bin/arm-linux-gcc –ggdb -o tcpsp-debug tcpsp.c 
[root@server11 1st_application]# 11 
total 92 
-rw-r—-r--  1  root  root   514  Nov  27  11:52  Makefile 
-rwxr-xr—x  1 root root 25843 Nov 27 12:03 

tcps2-debug

 

-rwxr—xr-x  1  root  root  4996  Nov  27  12:03 

tcps2-release

 

-rw-r—-r--  1  root  root  4554  Nov  27  11:52  tcps2.c 
-rwxr—xr-x  1 root root 26823 Nov 27 12:03 

tcpsp-debug

 

-rwxr—xr-x  1  root  root  5396  Nov  27  12:03 

tcpsp-release

 

-rw-r—-r--  1  root  root  6164  Nov  27  11:55  tcpsp.c 
[root@server11  1st_application]#   
 

 

Two executable files, tcps2-release and tcps2-debug, are created. 

tcps2-release—an ARM platform execution file (created specifically to run on the 
W311/321/341). 

tcps2-debug—an ARM platform GDB debug server execution file (see Chapter 5 for details about 
the GDB debug tool). 

NOTE 

If you get an error message at this point, it could be because you neglected to put tcps2.c and 
tcpsp.c in the same directory. The example Makefile we provide is set up to compile both tcps2 
and tcpsp into the same project Makefile. Alternatively, you could modify the Makefile to suit 
your particular requirements.