Cisco Systems SG300-28MP Manual De Usuario

Console—The Console port is where you can connect a serial cable to a 
computers serial port for configuration using a terminal emulation program.

To use the Reset button to reboot or reset the managed switch, do the 
following:

  • To  reboot the managed switch, press the Reset button for less than 10 

seconds.

  • To restore the managed switch configuration to the factory default 

settings:

1. Disconnect the managed switch from the network or disable all 

DHCP servers on your network.

2. With the power on, press-and-hold the Reset button for more than 

10 seconds.