Crestron electronic TPS-12G-QM Manual De Usuario

Crestron TPS-12G/15G/17G-QM Isys

®

 G-Series Touchpanels

These touchpanels can display two fully scalable and movable, full motion video 
windows, each supporting standard video, HDTV and high-resolution RGB signals 
from external AV and computer sources. These units use auto-detect for composite, 
S-video or component RGBHV. They support SDTV (NTSC and PAL), EDTV, 
HDTV and RGB (VGA) up to UXGA (1600 x 1200). Two video inputs provide for 
connectivity to QuickMedia. You can perform Auto Detect by touching QM Audio 
1 or QM Audio 2 or manually choose Video, S-Video, Component or RGB as an 
input source. Black and white can also be enabled for either video channel. 

A table describing the video menu controls follows the illustrations. Touching Video 
on the SETUP MENU will open the screen shown below. From here you can enter 
the setup screens for both Video 1 and Video 2 by touching their respective buttons.

 

Refer to the following table for additional VIDEO SETUP menu details. 

QM Audio 1 

Detects the presence of QM Audio on channel 1. 

QM Audio 2 

Detects the presence of QM Audio on channel 2. 

Setup Video 1 

Displays the VIDEO 1 SETUP menu. By default, the VIDEO 
1 SETUP menu displays video controls: Brightness, 
Contrast, Saturation and Hue on the right side of the menu. 

Video 

Pressing this before pressing the Setup Video 1 button will 
open the VIDEO 1 SETUP menu in Video mode. 

•  41