Regency U32S-LP5 Manual De Usuario

U32S-5 FPI Direct Vent Gas Insert

If your fan requires maintenance or replacement, access to the fan is 
through the plate on the rear wall of the fi rebox. NOTE: the unit MUST 
NOT be operated without the fan access panel securely in place.

1)  Turn the unit off and allow it to cool down to room temperature.

2)  Disconnect the power source and turn off the gas supply to the
 insert.

3)  Open the bottom louver.

4)  Remove the door frame by lifting out from the bottom and lift up off 

the glass door.

5)  Remove the glass door.

 

a)  Remove the 2 hooks shown below at the bottom of the glass  
 

     door

. 

Swing the door out 45

o

 from the bottom and lift up and  

 

      out.

7)  Remove the burner by undoing the 2 screws shown. 

           a)  Carefully slide the burner to the left.  
         
          b)  Then lift the burner up and out carefully, ensuring not to spill       

          the glass crystals.