Hitachi VM-H835LA Manual De Usuario
Specifications
67
start recording.
• Do not remove the clock battery after recording.
• Do not eject the recorded cassette. Leave it in the
camcorder.
• Do not remove the clock battery after recording.
• Do not eject the recorded cassette. Leave it in the
camcorder.
BATTERY CONDITION
Symptom
Check Point & Correction
The (
) indication in the electronic
viewfinder flashes to indicate battery is
discharged.
discharged.
• Try another battery or charge the battery.
The battery level indicator (
) appears
differently on the LCD monitor and in
the viewfinder.
the viewfinder.
• This does not indicate a fault; it is because the
power consumed by the LCD monitor and viewfinder
is different.
power consumed by the LCD monitor and viewfinder
is different.
NO OPERATION IS ACCEPTED
Symptom
Check Point & Correction
Power is turned on, but no button
operations are accepted.
operations are accepted.
• Remove the power source and the date/title
battery. And after about one minute, the display in
the viewfinder or LCD monitor will be reset. Then set
the information again.
battery. And after about one minute, the display in
the viewfinder or LCD monitor will be reset. Then set
the information again.
TAPE DISPLAY
Symptom
Check Point & Correction
"TAPE" appears in the viewfinder or
LCD monitor.
LCD monitor.
• Have you moved the camcorder or cassette from a
cold place to a warm place so that its temperature
changed abruptly? If the temperature has changed,
remove the cassette and set the CAM/OFF/VIDEO
switch to OFF, then wait for about one hour.
• Remove the cassette and then try to reinsert:
remove it several times. If the indication is still
shown in the viewfinder, use a cleaning tape to
clean the heads and replace the cassette.
cold place to a warm place so that its temperature
changed abruptly? If the temperature has changed,
remove the cassette and set the CAM/OFF/VIDEO
switch to OFF, then wait for about one hour.
• Remove the cassette and then try to reinsert:
remove it several times. If the indication is still
shown in the viewfinder, use a cleaning tape to
clean the heads and replace the cassette.
Specifications
General Specifications
Power requirements
7.2V DC
Power consumption
4.4W (when recording/LCD monitor OFF)
5.5W
(when
recording/LCD
monitor
ON)
Dimensions
4-1/8" W x 4-1/2" H x 9-7/16" D (104mm x 115mm x 239mm)
Weight
2.03 lbs (approx. 920g) without battery pack or
cassette
Operating temperature
Operating temperature
32°F ~ 104°F (0°C ~ 40°C)