Casio QV-2300UX Manual De Usuario

• Make sure that you do not touch or block the flash or the

exposure sensor with your fingers.  Doing so can soil these
components and interfere with correct flash operation.

• The flash unit does not charge when battery power is too

low to charge the flash.  The 

 (Flash Off) indicator ap-

pears to warn you that the flash will not fire correctly, which
may affect exposure of the image.  Replace batteries as
soon as possible when this happens.

• Red-eye reduction 

 may not work well when the camera

is not pointed directly at the subject or when the subject is
far from the camera.

• In the Red-eye Reduction Mode 

, the flash is fired auto-

matically in accordance with exposure.  Because of this,
the flash does not fire if the subject is well-lit.

• White balance is fixed while the flash is being used, so sun-

light, fluorescent lighting, or other sources of illumination in
the immediate area may affect the coloring of the recorded
image.

• The effective range for the built-in flash depends on your

camera model.

*

QV-2300UX: Approximately 0.5m to 2m (at full aperture)

*

QV-2800UX: Approximately 0.5 to 2.5m (at full aperture)

Note that you may not be able to obtaine the desired flash
result outside the ranges noted above.

• Depending on operating conditions (type of batteries being

used, temperature, etc. ), it may take up to 10 seconds for
the flash unit to charge.

• The flash is disabled during movie recording, which is indi-

cated by the 

 (Flash Off) icon on the monitor screen.

Flash

Exposure sensor

QV-2800UX

Flash

Exposure sensor

QV-2300UX