Bodyline Products International 216FD-V Manual De Usuario
25
AXIS 216FD/FD-V/MFD/MFD-V - Audio
Depending on the selected encoding, set the desired audio quality (Bit rate). The settings
affect the available bandwidth and the required audio quality.
The AXIS 216FD/FD-V/MFD/MFD-V can be set to trigger an event if the incoming sound
level rises above, falls below or passes the set value. The Alarm level is set between
0-100%.
Audio Output
If the sound from the speaker is too low or high, adjust the output gain for the active
speaker attached to the AXIS 216FD/FD-V/MFD/MFD-V.
When satisfied with the settings, click Save, or click Reset to revert to the previously saved
settings.
Note:
To receive synchronized video in MPEG-4 and audio, it is recommended that the time settings in the camera
and client PC are synchronized with an NTP Server. This is enabled in the camera under
and client PC are synchronized with an NTP Server. This is enabled in the camera under
System Options >
Date & Time. Please refer to the help pages for more information.