Nikon DS-2MV Manual De Usuario

 

VI Basic Operations 

 

NETWORK 

 

 

4    Using the DS-L1 via a Network 

- 111 - 

To test the connection state of the external server, execute    Ping Test    on the Network 
Settings screen. This function is used to inspect whether the specified server exists in the 
LAN. This connection test is performed on the server that is shown in the “IP Address” 
column of External Server. However, it is necessary as a premise that the IP Address has 
been saved by pressing    SAVE . When a response is received from the server, a message 
“OK Complete!” is displayed. 

 

Ping may not always be responded to for reasons of security functions such as packet filter, 
firewall or security gateway. Ping test may be reexecuted after disabling the security 
function of the server. In that case, restart the DS-L1 first. Also, even when Ping was not 
responded to, there is no problem with the server connection only if the server can be 
logged-in in the login test described below. 

 

To test logging in to the server, execute    Login Test    on the Network Settings screen. A 
login test is performed on the server that is shown in the IP Address column of External 
Server by using its set User ID and Password. However, it is necessary as a premise that 
the User ID and Password have been saved by pressing    SAVE . If the server cannot be 
logged in, check settings on the PC side and those of the DS-L1.