Panasonic KX-HCM280 Manual De Usuario
Operating Instructions
20
2.3
How to turn on Network Camera for
Installation
Network Camera powers up when connecting AC plug to the power outlet.
Notes
•
Do not hold or touch the Pan/Tilt as it starts moving when connecting AC
plug to the power outlet.
plug to the power outlet.
•
AC adaptor is used as the main disconnect device, so ensure that the
power outlet is located/installed near the equipment and is easily
accessible.
power outlet is located/installed near the equipment and is easily
accessible.
•
Use only specified Panasonic AC adaptor PSLP1242 (Order No.
PSLP1242Z).
PSLP1242Z).
•
When you set up Network Camera in [Type 3], connect it temporarily in
[Type 1], [Type 2] or [Type 4].
[Type 1], [Type 2] or [Type 4].
•
When Indicator is orange, confirm that the Ethernet cable is properly
connected, or PC, Ethernet hub or broadband router is properly working.
connected, or PC, Ethernet hub or broadband router is properly working.
External I/O
Ethernet port
AC cord
To Network
Category 5 straight/cross cable
Connect the DC plug of the
AC adaptor to the DC IN jack.
AC adaptor to the DC IN jack.
Hook the AC adaptor cord
to the Hook for AC Adaptor.
to the Hook for AC Adaptor.
Connect the AC cord
to the AC adaptor.
to the AC adaptor.
Connect the AC plug
of the AC cord to
the power outlet.
of the AC cord to
the power outlet.
2)
1)
4)
Connect a category 5
straight/cross cable
to the Ethernet port.
straight/cross cable
to the Ethernet port.
3)
5)
Power Outlet
Hook for AC Adaptor
DC IN jack