Canon EOS50DBODY Manual De Usuario

148

Whenever you set the power switch to <1/J> or <2>, the Self 
Cleaning Sensor Unit operates to automatically shake off the dust on 
the front of the sensor. Normally, you need not be aware of this 
operation. However, you can execute the sensor cleaning at anytime as 
well as disable it.

 

Under the [6] tab, select [Sensor 
cleaning], then press <0>.

Select [Clean nowf].

 

Turn the <5> dial to select [Clean 
nowf], then press <0>.

 

Select [OK], then press <0>.

X

The screen will indicate that the 
sensor is being cleaned. Although 
there will be a shutter sound, a 
picture is not taken.

 

In step 2, select [Auto cleaningf] and set it to [Disable].

X

The sensor cleaning will no longer be executed when you set the 
power switch to <1/J> or <2>.

3

 

For best results, do the sensor cleaning while the camera bottom is 
placed on a table or other surface at a perpendicular angle.

 

Even if you repeat the sensor cleaning, the result will not improve that 
much. Right after the sensor cleaning is finished, the [Cleaning 
nowf] option will remain disabled temporarily.

COP

Y