Canon EOS50DBODY Manual De Usuario
24
1
Remove the protective cover.
When you remove the battery from
the camera, be sure to reattach the
cover to protect it against short
circuiting.
the camera, be sure to reattach the
cover to protect it against short
circuiting.
2
Attach the battery.
Align the battery’s front edge with the
battery charger’s index line. While
pressing down the battery, slide it in
the direction of the arrow.
battery charger’s index line. While
pressing down the battery, slide it in
the direction of the arrow.
To detach the battery, follow the
above procedure in reverse.
above procedure in reverse.
3
Recharge the battery.
For CG-580
For CG-580
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
battery charger’s prongs and insert
the prongs into a power outlet.
For CB-5L
Connect the power cord to the
charger and insert the plug into the
power outlet.
charger and insert the plug into the
power outlet.
X
Recharging starts automatically and
the charge lamp starts blinking in red.
the charge lamp starts blinking in red.
It takes about 100 min. to fully
recharge a completely exhausted
battery.
The time required to recharge the
battery depends on the ambient
temperature and battery’s charge
level.
recharge a completely exhausted
battery.
The time required to recharge the
battery depends on the ambient
temperature and battery’s charge
level.
Recharging the Battery
Battery pack slot index
CG-580
CB-5L
* The numbers and markings on the battery
charger correspond to the table above.
Recharge Level
Charge Lamp
0 - 50%
Blinks once per second
50 - 75%
Blinks twice per second
75 - 90%
Blinks three times
per second
90% or higher
Lights on
COP
Y