Fujifilm BL00840-200 E Manual De Usuario
12
Inserting a Memory Card
1
Open the battery-chamber cover.
Lightly press the center
of the battery-chamber
cover and open it as
shown.
of the battery-chamber
cover and open it as
shown.
1 Note
Be sure the camera is off before opening the bat-
tery-chamber cover.
Be sure the camera is off before opening the bat-
tery-chamber cover.
2
Insert the memory card.
Holding the memory card in the orientation
shown below, slide it all the way in.
shown below, slide it all the way in.
Be sure card is in correct
orientation; do not insert
at an angle or use force.
orientation; do not insert
at an angle or use force.
3
Close the battery-chamber cover.
Close the battery-cham-
ber cover and then
lightly press it down and
slide it in to latch.
ber cover and then
lightly press it down and
slide it in to latch.
Removing Memory Cards
After confi rming that the cam-
era is off , press the card in and
then release it slowly. The card
can now be removed by hand.
era is off , press the card in and
then release it slowly. The card
can now be removed by hand.
3 Cautions
• The memory card may spring out if you remove
• The memory card may spring out if you remove
your fi nger immediately after pushing the card in.
• Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
does not indicate a malfunction.
■
■ Inserting a Memory Card
Inserting a Memory Card