Cisco Systems PA-MC-8TE1 Manual De Usuario
lex burned-in-address
To set the burned-in MAC address for a LAN Extender interface, use the lexburned-in-address command
in interface configuration mode. To clear the burned-in MAC address, use the no form of this command.
in interface configuration mode. To clear the burned-in MAC address, use the no form of this command.
lex burned-in-address ieee-address
no lex burned-in-addresslex burned-in-address command
Syntax Description
48-bit IEEE MAC address written as a dotted triplet
of 4-digit hexadecimal numbers.
of 4-digit hexadecimal numbers.
ieee-address
Command Default
No burned-in MAC address is set.
Command Modes
Interface configuration
Command History
Modification
Release
This command was introduced.
10.3
This command is no longer supported in Cisco_IOS Mainline or
Technology-based (T) releases. It may continue to appear in Cisco_IOS
12.2S-family releases.
Technology-based (T) releases. It may continue to appear in Cisco_IOS
12.2S-family releases.
12.2(15)T
Usage Guidelines
Use this command only on a LAN Extender interface that is not currently active (not bound to a serial interface).
Examples
The following example sets the burned-in MAC address on LAN Extender interface 0:
Router(config)#
interface serial 4
Router(config-if)#
encapsulation ppp
Router(config)#
interface lex 0
Router(config-if)#
lex burned-in-address 0000.0c00.0001
Router(config-if)
ip address 10.108.172.21 255.255.255.0
Cisco IOS Interface and Hardware Component Command Reference
32
l2 vfi manual through loopback PA-MC-8TE1 + port adapter
lex burned-in-address