Cisco Systems PA-MC-8TE1 Manual De Usuario
lex priority-group
To activate priority output queueing on the LAN Extender, use the lexpriority-group command in interface
configuration mode. To disable priority output queueing, use the no form of this command.
configuration mode. To disable priority output queueing, use the no form of this command.
lex priority-group group
no lex priority-group
Syntax Description
Number of the priority group. It can be a number in
the range 1 to 10.
the range 1 to 10.
group
Command Default
Disabled
Command Modes
Interface configuration
Command History
Modification
Release
This command was introduced.
10.3
This command is no longer supported in Cisco_IOS Mainline or
Technology-based (T) releases. It may continue to appear in Cisco_IOS
12.2S-family releases.
Technology-based (T) releases. It may continue to appear in Cisco_IOS
12.2S-family releases.
12.2(15)T
Usage Guidelines
To define queueing priorities, use the priority-listprotocol global configuration command. Note that you can
use only the following forms of this command:
use only the following forms of this command:
priority-list
list
protocol
protocol
{
high
high
|
medium
|
normal
|
low
priority-list
priority-list
list
protocol
bridge
bridge
Cisco IOS Interface and Hardware Component Command Reference
37
l2 vfi manual through loopback PA-MC-8TE1 + port adapter
lex priority-group