VTech CS6114 Manual De Usuario

4

Once you have installed the battery, the screen indicates the battery status 

(see the table below). If necessary, place the handset in the telephone 

base to charge the battery. For best performance, keep the handset in    

the telephone base when not in use. The battery is fully charged after  

16 hours of continuous charging. See the table on page 25 for battery 

operating times.
If the screen is blank, you need to charge the handset without interruption 

for at least 30 minutes to give the handset enough charge to use the 

telephone for a short time. When the battery is low, the handset displays 

Low battery along with a flashing   icon. If you are on a call in low battery 

mode, the handset beeps every 50 seconds.
The following table summarizes the battery charge indicators and actions 

to take.

Battery indicators

Battery status

Action

The screen is blank, 

or displays 

charger and 

 flashes

.

Battery has very little or 

no charge. The handset 

cannot be used.

Charge without interruption 

(at least 30 minutes).

The screen displays 

Low battery and         

 flashes. 

Battery has enough 

charge to be used for a 

short time.

Charge without interruption 

(about  30 minutes).

The screen displays  

HANDSET 1 and  

--:--  --/--.

Battery is charged.

To keep the battery charged, 

place it in the telephone 

base when not in use.

If you place the handset in the telephone base without plugging in the battery, 

the screen displays 

No battery.

Press to page the handset (page 12).

IN USE light
On when the handset is in use.
Flashes quickly when there is an 

incoming call.
Flashes when another telephone 

sharing the same line is in use.