Golden Technologies GP204 Manual De Usuario
Alante DX/LT Owner’s Manual Rev A_011811
VI. COMFORT SETTINGS - cont.
2. Adjust the arms to the desired width making sure not to exceed 28 inches total outside
width at the armrests.
3. Tighten the arm width adjustment screw to secure the arm. See figure 18 on page 21.
4. Repeat steps 1-3 to adjust the opposite arm.
width at the armrests.
3. Tighten the arm width adjustment screw to secure the arm. See figure 18 on page 21.
4. Repeat steps 1-3 to adjust the opposite arm.
Arm Rest Angle Adjustment
1. Lift the armrest.
2. Loosen the stop nut with a 10mm wrench. See figures 19-21.
3. Use a 5mm Allen wrench to turn the armrest angle adjustment screw. Turn the screw
outward to adjust the angle downward, turn it inward to adjust the angle upward to the
desired angle.
outward to adjust the angle downward, turn it inward to adjust the angle upward to the
desired angle.
Figure 19 Figure 20 Figure 21
4. Tighten the stop nut with a 10mm wrench to lock the armrest angle adjustment screw.
5. Repeat steps 1-4 for the opposite arm.
Footrest Angle Adjustment
1. Lift the footrest plate to access the adjustment bolt. See figure 22.
Footrest Angle Adjustment
1. Lift the footrest plate to access the adjustment bolt. See figure 22.
Figure 22
22
Footrest Plate
Adjustment bolt
10 mm
stop nut
stop nut
Adjustment screws