Sunwave Tech. SRC-3810 Manual De Usuario
SRC-38 SERIES User’s Manual
8
Touch Screen Buttons
The Touch Screen buttons enable you to operate the
SRC-3810/3815 and your external devices. Use these
buttons to program codes from your existing remotes,
control your devices, and set up command
SRC-3810/3815 and your external devices. Use these
buttons to program codes from your existing remotes,
control your devices, and set up command
sequences called macros. You will hear a beep when
you press a button. To activate or deactivate the
beep, see Setting the Beep Signal on page 39. The
SRC-3810/3815 turns itself off after a user specified
time. To change the time, see Setting the Power Down
you press a button. To activate or deactivate the
beep, see Setting the Beep Signal on page 39. The
SRC-3810/3815 turns itself off after a user specified
time. To change the time, see Setting the Power Down
Time on page 38.
Using Hard Keys
The buttons on the bottom part of the SRC-3810/3815
enable you to operate devices as well as program the
SRC-3810/3815.
Three buttons have special functions:
enable you to operate devices as well as program the
SRC-3810/3815.
Three buttons have special functions:
• Page/Date Button: Toggles from Page 1 to
Page 2 of the device buttons menus. If held
down for more than two seconds, the date
down for more than two seconds, the date
and time are displayed.
• Power Button: Turns devices off and on. During
Touch Screen Layout (see page 26) displays all
possible LCD options.
• Backlight: Press this button quickly to turn on
the backlight.
Entering the Setup Menus
Press and hold the and the buttons
simultaneously to access the setup menus.
simultaneously to access the setup menus.