3com 09-1632-000 Manual De Usuario
Configuration Procedure
15
4 To manually enter SPID values, follow these steps:
a In the Dial On Demand ISDN Setup section of the
navigation frame, click the PATH SPIDdn1 link.
b In the start field, click the arrow and choose 2.
c In the SPIDdn1 field, enter the first SPID value in quotes .
Refer to the work order provided by your Telco vendor
to determine the SPID values. For example, enter:
to determine the SPID values. For example, enter:
"spidstring1"
d Click Apply.
e In the Dial On Demand ISDN Setup section of the
navigation frame, click the PATH SPIDdn2 link.
f In the start field, click the arrow and choose 2.
g In the SPIDdn2 field, enter the second SPID value in
quotes. For example enter:
"spidstring2"
h Click Apply.
5 Enter the switch type.
a In the Dial On Demand ISDN Setup section of the
navigation frame, click the PATH SwitchType link.
b In the start field, click the arrow and choose 2.
c In the SwitchType field, click the arrow and choose your
switch type. Refer to the work order provided by your
Telco vendor to determine your switch type. For
example, choose NTT.
Telco vendor to determine your switch type. For
example, choose NTT.
6 Enable the ISDN paths.
a In the Dial On Demand ISDN Setup section of the
navigation frame, click the PATH CONTrol link.
b In the start field, click the arrow and choose 2.1.
c In the end field, click the arrow and choose 2.2.
d In the CONTrol field, click the arrow and choose
Enabled.
e Click Apply.
Your ISDN line is now initialized.
OC10.book Page 15 Thursday, May 13, 1999 2:33 PM