3com 09-1632-000 Manual De Usuario
Configuration Procedure
21
c Click Apply.
4 Assign an IP address to your routing ports.
a In the Basic IP section of the navigation frame, click the
IP NETaddr link.
b In the start field, choose 1.
c In the NETaddr field, enter a network address. For
example, enter:
20.1.0.1
d Click Apply.
5 Reboot the OfficeConnect NETBuilder bridge/router by
unplugging the power cord from the bridge/router then
plugging it back in. Wait for all the LEDs to turn green.
plugging it back in. Wait for all the LEDs to turn green.
When all the LEDs are green, you will need to relogin to the
OfficeConnect NETBuilder bridge/router. Remember to use
the user name “root” and the new password you assigned
for the root user.
OfficeConnect NETBuilder bridge/router. Remember to use
the user name “root” and the new password you assigned
for the root user.
6 Reboot the network management station PC so that the
DHCP client in the network management station acquires a
new address from the OfficeConnect NETBuilder
bridge/router DHCP server.
new address from the OfficeConnect NETBuilder
bridge/router DHCP server.
7 Point the browser on the client to the new port 1 IP
address. For example, enter:
20.1.0.1
8 In the Basic IP section of the navigation frame, click the IP
NETaddr link.
a In the start field, choose 4.
b In the NETaddr field, enter IPCPA.
c Click Apply.
9 In the Dial On Demand Dynamic Dial section of the
navigation frame, click the PORT CONTrol link.
a In the start field, choose 4.
b In the CONTrol field, choose Enabled.
OC10.book Page 21 Thursday, May 13, 1999 2:33 PM