Polycom VIEWSTATION EX Manual De Usuario

 

This command selects the PathNavigator™ mode, if PathNavigator 
is used with the system. Because PathNavigator uses an MGC, it 
can handle videoconferences with more participants and higher 
speeds than an embedded MCU. PathNavigator, which supports 
ad-hoc multipoint videoconferencing, is required to implement 
Conference on Demand™. Conference on Demand allows users to 
bring multiple endpoints together in a videoconference on an 
unscheduled basis. It allows users to place multipoint video calls to 
remote participants by only using their names and/or numbers that 
correspond to those remote locations.

Always use PathNavigator to place a multipoint call. 
Never use the external MCU.

Never use PathNavigator to place a multipoint call. Use 
the external MCU instead.

This is the default. When this option is selected, if the 
multipoint call is within the MCU capabilities, it is 
handled by the MCU; otherwise, beyond the MCU 
capabilities, it is handled through the 
PathNavigator/MGC. 

Displays the current setting (always, never, or 
required).

Note 1  This option is only accessible if PathNavigator is used.

Note 2  ViewStation EX: this multipoint option is not available 

unless you update your ViewStation EX system to support 
multipoint capabilities. For more information, refer to the 
ViewStation EX User Guide.

usepathnavigator required