Polycom VIEWSTATION EX Manual De Usuario

© Polycom, Inc. 2003

This command lets you configure the dsr serial interface control 
signal (data set ready). The default setting for this signal is normal. 

Sets the signal to normal (high voltage is logic 1).

Sets the signal to inverted (low voltage is logic 1).

Displays the current setting (normal or inverted).

dsr get

System Info>Admin Setup>Video Network>Advanced V.35: DSR

This screen is only accessible if you have a 
V.35/RS-449/RS-530/RS-366 network interface connected to your 
system.

This command sets the dsr serial interface control signal as a ring-in 
indicate. 

Turns on the option.

Turns off the option.

Displays the current status (on or off).