Polycom VIEWSTATION EX Manual De Usuario

© Polycom, Inc. 2003

This command lets you configure the rt serial interface control signal 
(receive timing: clock). The default setting for this signal is normal. 

Sets the signal to normal (rising edge receives data).

Sets the signal to inverted (falling edge receives data).

Displays the current setting for this option (normal or 
inverted).

rt inverted

System Info>Admin Setup>Video Network>Advanced V.35: RT

This screen is only accessible if you have a 
V.35/RS-449/RS-530/RS-366 network interface connected to your 
system.

This command lets you configure the rts serial interface control 
signal (request to send). The default setting for this signal is normal. 

Sets the signal to normal (high voltage is logic 1).

Sets the signal to inverted (low voltage is logic 1).

Displays the current setting (normal or inverted).