Polycom VIEWSTATION EX Manual De Usuario
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003
53
Description
This command is used to configure DNS servers (up to 4 DNS
servers can be configured). After a change is made, the system
prompts the user for restart.
servers can be configured). After a change is made, the system
prompts the user for restart.
Note This option can only be set when DHCP is off.
set <{1..4}>
Sets a DNS server when followed by the parameter
xxx.xxx.xxx.xxx. If you want to erase the current
setting, omit the parameter.
xxx.xxx.xxx.xxx. If you want to erase the current
setting, omit the parameter.
get <{1..4}>
Displays the current IP address of the specified
server (1..4).
server (1..4).
1..4
Range of selectable servers.
xxx.xxx.xxx.xxxServer IP address.
Examples
dns set 1 192.168.1.111
dns get 4
User Interface Screen Location
System Info>Admin Setup>LAN/H.323>LAN/Intranet>
LAN & Intranet: DNS Servers
dynamicbandwidth <yes|no|get>
Description
This command is used to specify use of dynamic bandwidth
allocation for Quality of Service. The systems’ dynamic bandwidth
function automatically finds the optimum line speed for a call. If you
experience excessive packet loss while in a call, the dynamic
bandwidth function decrements the line speed until there is no
packet loss.This is supported in calls with endpoints that also
support dynamic bandwidth.
allocation for Quality of Service. The systems’ dynamic bandwidth
function automatically finds the optimum line speed for a call. If you
experience excessive packet loss while in a call, the dynamic
bandwidth function decrements the line speed until there is no
packet loss.This is supported in calls with endpoints that also
support dynamic bandwidth.
yes
Enables the option.
dynamicbandwidth