Panasonic KX-TG2216SV Manual De Usuario

 

The unit does not work.

• Check the settings (p. 8–10).
• Check whether the dialing mode setting is 

correct (p. 13).

• Charge the battery fully (p. 9).
• Clean the charge contacts and charge again 

(p. 10).

• Install the battery properly (p. 9).
• Place the handset on the base unit and unplug 

the AC adaptor to reset it. Plug in, and try again.

• Re-install the battery (p. 9) and charge it fully.

“

 

No link to base. 

Place on cradle and 

try again.

 

” is displayed 

and an alarm tone sounds.

• You are too far from the base unit. Walk closer 

and try again.

• Place the handset on the base unit and try 

again.

• Plug in the AC adaptor.
• Raise the base unit antenna.

Static, sound cuts in/out, 
fades. Interference from 
other electrical units.

• Move the handset and the base unit away from 

other electrical appliances (p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.
• Select a clearer channel (p. 19).

The handset does not ring.

• The ringer volume is set to OFF. Set to HIGH, 

MEDIUM or LOW (p. 16).

The handset display is 
blank.

• Charge the battery fully (p. 9).

You cannot program 
function items.

• Programming is not possible while the unit is 

being used.

• Do not pause for over 60 seconds while 

programming.

• Walk closer to the base unit.

While programming or 
searching, the unit starts to 
ring and stops the 
program/search.

• A call is coming in. To answer the call, press 

 

 or 

 

. Start again from the beginning after 

hanging up.