Sony KDF-E50A12U Manual De Usuario

Using the Menu

Presets programme channels manually.
1

Press M/m to select “Programme”, then press OK.

2

Press M/m to select the programme number you want 

to manually tune (if tuning a VCR, select channel 0), 
then press <.

3

Press M/m to select “Channel”, then press OK. 

4

Tune the channels as follows:
If you do not know the channel number (frequency)
Press M/m to search for the next available channel. When a 

channel has been found, the search will stop. To continue 
searching, press M/m.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the 
broadcast you want or your VCR channel number.

5

Press OK.

6

Press OK to select “Confirm”, then press OK.

Repeat the procedure above to preset other channels manually.

Assigns a name of your choice, up to five letters or numbers, to the 
selected channel. This name will be displayed briefly on the screen 
when the channel is selected. 
1

Follow steps 3 to 5 of “Programme Labels” (page 30).

2

Press OK to select “Confirm”, then press OK.

Fine-tunes the selected programme number manually if you feel 
that a slight tuning adjustment will improve the picture quality. 
(Normally, fine tuning is performed automatically.)
1

Press M/m to adjust the fine tuning over a range of -15 

to +15, then press OK.

2

Press “OK” twice.

To restore automatic fine tuning, select “On” in step 1.

Improves the sound for individual channels in the case of distortion 
in mono broadcasts. Sometimes a non-standard broadcast signal 
can cause sound distortion or intermittent sound muting when 
watching mono programmes.
1

Press m/M to select “Low” or “High”, then press OK.
If you do not experience any sound distortion, we recommend 
that you leave this option set to the factory setting “Off”.

2

Press OK to select “Confirm”, then press OK.

You cannot receive stereo or dual sound when “Low” or “High” is 
selected.

Continued