Toshiba DKT2004-CT Manual De Usuario

When you reach a busy station, you can set Automatic Callback to have the system 
monitor the busy extension and notify you when it becomes idle. 

Automatic Callback can also place you in queue for an available outside line, if you 
reach a line group in which all lines are busy. When a station or line becomes 
available, the system rings your telephone. Then when you answer, it automatically 
rings the intended destination. The amount of time the system will wait for an idle 
destination is set in system programming.

Automatic Callback is also known as “CO Line Queuing.”

➤

1. If you hear busy tone after dialing an outside line access code or a station number, 

press 

$XWR&DOOEDFN

 or 

. Busy tone stops, followed by success tone, then busy 

tone resumes.

2. Hang up. You can make other calls while waiting. 

3. When the called station or outside line becomes idle, your telephone rings with a 

fast LED.

•

If you called a busy station, the extension LED flashes green (incoming call) 
and the called number displays.

•

If you called a busy outside line, the extension LED flashes green (incoming 
call rate). The seized line’s number displays.

4. Answer within about three rings (five to 180 seconds, set in programming) to 

prevent the callback from being cancelled. After you answer, you hear success 
tone, and the LED flashes green (in-use).

If you hear a busy tone after answering a callback, the called party is already on 
another call or the line has already been seized or has received an incoming call. 
Your request is not cancelled. You will be called again the next time a line becomes 
idle.

If you were attempting to make an outside call, the telephone number is 
automatically dialed, including the account code or override codes that were used.

➤

➤

Press 

$XWR&DOOEDFN

 or extension button + 

.