Panasonic KX-TH102-M Manual De Usuario

106

For assistance, please visit http://www.panasonic.com/phonehelp

I cannot program items.

L While another user is listening to messages or the 

answering system is answering a call, you cannot 
program. Try again later.

While programming, the 
handset starts to ring.

L A call is being received. Answer the call and start again 

after hanging up.

Static is heard, sound 
cuts in and out. 
Interference from other 
electrical units.

L Move the handset and the base unit away from other 

electrical appliances (microwave, wireless LAN 
appliance, etc.).

L Move closer to the base unit.

L Raise the base unit antennas.

L Turn on the clarity booster feature (page 33).

L If your base unit is connected to a telephone line with 

DSL service, we recommend connecting a noise filter 
between the base unit and the telephone line jack. 
Contact your DSL provider for details.

The handset and base 
unit do not ring.

L The ringer volume is turned off. Adjust it (page 69, 90).

I cannot make a call.

L The dialing mode may be set incorrectly. Change the 

setting (page 29).

L The base unit (including answering system) or another 

handset is in use. Try again later.

I cannot redial by 
pressing

{REDIAL}.

L If the last number dialed was more than 48 digits long, 

the number will not be redialed correctly. Dial the 
number manually.

I cannot have a 
conversation using the 
headset.

L Make sure that a Panasonic optional headset is 

connected properly (page 102).

L Your optional Bluetooth headset is not registered. 

Register it (page 102).

L If “SP-phone” is displayed on the handset, press {C}

to switch to the headset.

I cannot make long 
distance calls.

L Make sure that you have long distance service.

I cannot page the 
handset or base unit.

L The called handset is too far from the base unit.

L The called unit is in use. Try again later.