Panasonic KX-TH102-M Manual De Usuario

For assistance, please visit http://www.panasonic.com/phonehelp

75

Note:
L You can select a line manually 

regardless of the line selection mode by 
pressing

{LINE1} or {LINE2}.

Flash time
The flash time depends on your telephone 
exchange or host PBX.
L You only need to program this setting 

once, using either the handset or base 
unit.

Important:
L The setting should stay at 700 ms unless 

pressing

{FLASH} fails to pick up the 

Call Waiting call.

{MENU} (F2) i x i {SELECT}

“Set tel line”

i {SELECT}

“Set flash time”

i {SELECT}

Select the desired line.

Select the desired setting. (Default: 
“700ms”)

i {SAVE} i {OFF}

{MENU} i h i {SET}

“Set tel line”

i {SET}

“Set flash time”

i {SET}

Select the desired line.

Select the desired setting. (Default: 
“700ms”)

i {SET} i {STOP}

Note for handset and base unit:
L If the unit is connected via a PBX, certain 

PBX functions (call transferring, etc.) 
may not work correctly. Consult your 
PBX supplier for the correct setting.

Line mode
Generally, the line mode setting should not 
be adjusted.
When another phone connected to the 
same line is in use, and

– if 

k or l is not displayed on the 

handset, or

– if 

{LINE1} or {LINE2} button light is off 

on the base unit,

you need to change the line mode to “A”.
L You only need to program this setting 

once, using either the handset or base 
unit.

{MENU} (F2) i x i {SELECT}

“Set tel line”

i {SELECT}

“Set line mode”

i {SELECT}

Select the desired line.

Select the desired setting. (Default: “B”)
i {SAVE} i {OFF}

{MENU} i h i {SET}

“Set tel line”

i {SET}

“Set line mode”

i {SET}

Select the desired line.

Select the desired setting. (Default: “B”)
i {SET} i {STOP}