Toshiba 2000-series Manual De Usuario
Features
Call Forward
Strata DK Digital Telephone 6/00
35
Remote Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
destination from a telephone outside of the system.
➤
To change the destination number
1. Call into the DK
system over a CO line
programmed for the
DISA feature.
programmed for the
DISA feature.
You hear ringback tone signal, then internal dial tone
for 10 seconds.
for 10 seconds.
Try again if you hear busy tone.
Note
See the System Administrator for DISA
telephone numbers.
telephone numbers.
2. After you receive dial
tone, press
then
dial your [PDN].
You hear a confirmation tone.
If a number is not dialed, the system automatically
makes the DISA CO line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
makes the DISA CO line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
3. Enter the Remote Call
Forward-External
security code.
security code.
You hear a confirmation tone. See the System
Administrator for the security code which is assigned
to your telephone in system programming.
Administrator for the security code which is assigned
to your telephone in system programming.