Fujitsu V3.1 Manual De Usuario
For the external switch to which an IBP module is connected for admin-
istration, you have to ensure that the Spanning Tree Protocol (STP) is
switched off for the port, which is connected to the first uplink port of the IBP
module.
istration, you have to ensure that the Spanning Tree Protocol (STP) is
switched off for the port, which is connected to the first uplink port of the IBP
module.
Before you activate management of a blade server with VIOM, only this port
is allowed to have a connection to external LAN switches. Other LAN cables
for the connection with other networks to external switches may only be con-
nected once the management of the blade server with VIOM has been acti-
vated. This is because the first six or first eight uplink ports form a static link
aggregation group (LAG) in the IBP standard configuration.
is allowed to have a connection to external LAN switches. Other LAN cables
for the connection with other networks to external switches may only be con-
nected once the management of the blade server with VIOM has been acti-
vated. This is because the first six or first eight uplink ports form a static link
aggregation group (LAG) in the IBP standard configuration.
4.1.4.1 Network - Overview
All components such as the management blades and I/O connection blades,
the central management station, and the management console must be inter-
connected via LAN. It is recommended that you set up a management LAN
that is separate from the productive LAN, as illustrated in the following figure.
the central management station, and the management console must be inter-
connected via LAN. It is recommended that you set up a management LAN
that is separate from the productive LAN, as illustrated in the following figure.
If there are not enough physical ports available, a VLAN-based man-
agement LAN can also be implemented.
agement LAN can also be implemented.
ServerView Virtual-IO Manager
105
4.1 Configurations on the managed BX600 Blade Server